The Beginner’s Guide to Taps

Guide to Beer Keg Taps

Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. You can splash foam all over you or all over your face. You would see people doing this but it is not as easy as it looks.

In order to get beer from the keg, you need to control the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. You can get you beer when the pressure is released and it pushes the beer up to your glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.

You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. You should remove the cap or seal since it is harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. You need to play it safe.

A portable keg system can be tapped with CO2. Pressure is received by the keg in a single unit pump and tap combination, which is called party pump. IN this type, the keg and the beer keg tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. Air pressure is applied to the keg by pumping and when the lever is pushed, which is the tap handle, beer is released.

When beer is mixed with air, it begins to lose its flavor and this is the reason why a pony keg or a portable keg should be consumed in a single day when the beer already loses its flavor. In a traditional keg and on and off valve is used. This traditional keg does not need air pressure since it works using gravity. When the valve is used, you simply turn to open or close the keg to get some beer.

Leave a Reply

Your email address will not be published.